Blu2light
Back to Partners
BLU2LIGHT

Blu2light

Wireless Lighting Control & Building Management

Blu2light is a wireless lighting control and building management system built on Bluetooth® mesh technology. With no control cabling and no internet dependency, Scott Group uses it to bring smart lighting, sensing and energy reporting into occupied and heritage buildings across Ireland.

About the Partnership

Scott Group & Blu2light

Blu2light, from Vossloh-Schwabe, is a wireless lighting control and building management system based on Bluetooth® mesh technology. It enables convenient, simple control from a phone or tablet, and it brings DALI, DMX, LED drivers, sensors and room control into one network. Add a gateway and an open protocol and the same system becomes the platform for a wide range of IoT applications — energy reporting, air quality, diagnostics and building dashboards. Because the intelligence is decentralised, every room keeps working on its own: no internet access is required, and a project does not depend on a cloud service staying online. There is no control cabling to install, which is why Blu2light suits occupied buildings, protected and heritage interiors, and retrofit work where opening walls and ceilings is simply not an option. Scott Group specifies, commissions and supports Blu2light systems for projects across Ireland.

Ideal For

Retrofit ProjectsHeritage BuildingsOfficesEducationWarehousesMuseums & GalleriesRetail
Capabilities

Key Capabilities

Bluetooth® mesh — no control cabling to install
Controls DALI, DMX, LED drivers, sensors and room control
LAN Gateway with open interface for BMS and IoT
Sensors for presence, daylight, humidity and air quality
Runs standalone — no internet connection required
DALI-PMD power measurement and diagnostics readout
LiNA Connect commissioning and LiNA Touch operation apps
Ideal for occupied buildings, heritage and retrofit
Commercial Range

Three layers of one wireless system

Control, sensing, connection and power — every element of a Blu2Light system, grouped by what it does in the building.

Control & dimming

DALI & DMX Controllers

The easiest route into Blu2Light control. Whether indoors or outdoors, every luminaire can be equipped — DALI controllers for the building, DMX for architectural and feature lighting, and NEMA-mounted street lighting units with daylight and GPS control.

Wireless Drivers & Dimmers

Blu2Light-ready LED drivers for linear, compact and track luminaires, 4-channel constant-voltage dimming for tape and coves, and a wireless relay for non-dimmable loads and roller shutters — so most luminaires are specified into the system from the start.

Sensing & data

Sensors

Presence and daylight detection with light control built in, from 4 m offices to 17 m high bays, plus air quality, humidity and temperature sensing for building automation. An industrial version is DALI-powered and IP protected.

LAN Gateway

The link between the Bluetooth® mesh and the IP world. It processes and stores data from every device, enables DALI-PMD readout, and exposes all system parameters over an open interface for a BMS, dashboard or IoT platform.

Input & power

Input Devices

Keep the existing wall plates: Connect PB4 turns standard pushbuttons into four wireless control points, while the self-powered Switch S4 adds a four-key control anywhere without wiring or batteries.

Power & Accessories

DALI power supplies for 15, 40 or 64 operating devices make an existing DALI installation Blu2Light-capable, and the repeater extends the mesh across long distances, stair cores and separate wings.

Why Blu2Light

A Bluetooth® mesh system built for professional buildings

Wireless control of DALI, DMX, LED drivers, sensors and room control — commissioned from a tablet instead of a distribution board. Scott Group engineers and commissions Blu2Light across Ireland.

01

Quick & stable

The B2L mesh offers one of the fastest and most stable Bluetooth data transmissions, so scenes respond immediately and the network holds under load.

02

Open

All system parameters are available at the gateway over an open interface — ready for BMS, dashboards and the wider IoT layer without a proprietary box in between.

03

Safe

Highest possible system security through a unique QR code per device, so only devices commissioned on site can join the network.

04

Stand-alone

Decentralised intelligence means the system runs completely on its own. No internet access is required for lighting, sensing or scenes to keep working.

Apps

Two apps, and a reason for both

LiNA Connect is for commissioning — devices, rooms, profiles and lighting modes. LiNA Touch is for the people using the building: dimming, scenes and colour from a phone or tablet, with the permissions already prepared. Keeping them apart protects the configuration.

  • LiNA ConnectCommissioning & configuration, tablet, iOS and Android
  • LiNA TouchDaily operation, phone and tablet, iOS and Android
LiNA Touch lighting control app on a tablet
Product range

Everything in a Blu2Light system

Controllers, sensors, gateways, input devices, wireless drivers and power supplies — specified, supplied and commissioned by Scott Group. Select any product for the full specification.

System hardware

21 products

Apps

One for commissioning, one for the people using the building.

2 apps

Ready to explore Blu2light for your building?

Our certified team will assess your needs and recommend the best solution.